How to create a bridge like this:
I was tring to use tile number 382 (fences) in bil.ste which is a Flat tile, but I couldn't find the right Slopes to do that.
I haven't seen like this before in any map...
fancy bridge!
- Lantyz
- Psycho
- Posts: 71
- Joined: 14 Apr 2009, 08:20
- GH nick: Lantyz
- Location: The Netherlands
- Contact:
Re: fancy bridge!
The Golden Gate is featured in the San Andreas level of Grand Theft Auto, where it looks like this:
A suspension bridge I made myself long ago looks like this:
I used wil.sty, but I'm sure bil.sty has some similar tiles. What do you want to create with tile 382? If you're trying to create the cables, I suggest you try the tiles used for the electricity pylons in the Industrial District.
A suspension bridge I made myself long ago looks like this:
I used wil.sty, but I'm sure bil.sty has some similar tiles. What do you want to create with tile 382? If you're trying to create the cables, I suggest you try the tiles used for the electricity pylons in the Industrial District.
Re: fancy bridge!
Ha! It has been created before! where can I download these?
- Gustavob
- Immortal
- Posts: 407
- Joined: 18 May 2009, 21:40
- GH nick: Gustavob
|Gustavob| - Location: Nowhere.
- Contact:
Re: fancy bridge!
If you want to do a bridge like golden gate, you must do more or less this way:
Start with slopes with gradient one, and go increasing the gradient to 2 and 8 (if needed)
For example:
2 gradient 1 slopes, 2 gradient 2 slopes and 1 gradient 8 slope or
2 gradient 1 slopes and 3 gradient 2 slopes
This last one is the one I used to make my own one
http://img23.imageshack.us/i/goldengate2.jpg/
http://img97.imageshack.us/i/goldengate3.jpg/
http://img23.imageshack.us/i/goldengate4.jpg/
Increasing slope gradients is the best way to do a bridge like golden gate, and is the mostly used to make a kind of "curve"
Start with slopes with gradient one, and go increasing the gradient to 2 and 8 (if needed)
For example:
2 gradient 1 slopes, 2 gradient 2 slopes and 1 gradient 8 slope or
2 gradient 1 slopes and 3 gradient 2 slopes
This last one is the one I used to make my own one
http://img23.imageshack.us/i/goldengate2.jpg/
http://img97.imageshack.us/i/goldengate3.jpg/
http://img23.imageshack.us/i/goldengate4.jpg/
Increasing slope gradients is the best way to do a bridge like golden gate, and is the mostly used to make a kind of "curve"
You just lost the game.
Re: fancy bridge!
@Gustavob: I tried slope 1 and 2 but it didn't work with tile 382. This tile is good for bridge, isn't? I think it looks more beautiful than the tile has been used on golden gate.
Do slopes work different with flat tiles? Working with slopes is a little tricky!
Do slopes work different with flat tiles? Working with slopes is a little tricky!
- Gustavob
- Immortal
- Posts: 407
- Joined: 18 May 2009, 21:40
- GH nick: Gustavob
|Gustavob| - Location: Nowhere.
- Contact:
Re: fancy bridge!
Well, if the problem was the flat itself (tile didnt get flat), be completely sure you selected the cube face that should be flat in the map editor, via block info. With me it worked perfectly:
Notice that diagonal walls cannot be flat
Notice that diagonal walls cannot be flat
You just lost the game.